Turntable & AMP Covers
Click to scroll through customers covers.
Covers we had produced for many new high end and old school turntables such as Thornes, McIntosh, Marantz, Panisonic, Linn, Clearaudio, Rega, VPI.

​Click to view some customers covers.
  1. Custom Clear Acrylic Plinth and full turntable Dust Covers
  2. Great Custom Acrylic Turntable and AMP dust covers.
  3. Custom Clear Acrylic Turntable Dust Covers.
  4. AMP and Turntable Dust Covers
  5. Stereo and record player Dust Covers
  6. Clear Lucite AMP and Turntable Dust Covers
  7. Managing Director
  8. Managing Director
  9. Managing Director
  10. Volume Mixer Board Dust Covers
  11. Managing Director
  12. Managing Director

AMP & Turntable Dust Covers​

We produce all of our covers from clear Acrylic sheet material
 
Thicknesses from 1/8", 3/16", or 1/4" thick clear acrylic material.

Our covers are produced from 3 pieces of material consisting of the main body which is the front, top and rear of the cover. Two sides are then bonded onto the main body. After proper drying time all excess material is routed off to a flush edge finish.

Then we clean and polish all of the edges to a glass like finish.

We started producing these by model make and model numbers but had most of our customers looking for a full cover which covers their entire unit. Also, some customers who are building their own plinths bodies will be a different size the OEM.
 
So we offer OEM sized covers as well as full unit covers which w can add side handle cut-out as well as rear cord cut-outs if needed.

Click on the links below that best describe your rear cover cut-out to get an idea of proper size and location needed for your needs. The below drawings are looking from the back of the cover.
Single Rear Cut-out
Double Rear Cut-out
Long Rear Cut-out
Please click on the form below for a custom size turntable or AMP cover.